Home > Windows 7 > How To Dual Boot Windows Xp And Windows 7 (xp Installed First)

How To Dual Boot Windows Xp And Windows 7 (xp Installed First)

Contents

Reinstall your old software from their original discs. Congratulations! Right-click on the drive and select Shrink Volume. Make sure to take a moment and decide how much space to use for the XP partition. Source

EasyBCD 2.0 Beta (Forum Registration Required) JOIN THE DISCUSSION Tweet Brian Burgess worked in IT for 10 years before pursuing his passion for writing. In this example we made a 10GB partition for the XP install. Skip Steps 4 and 9. Follow the onscreen instructions and enter the appropriate information. http://www.howtogeek.com/howto/8790/dual-boot-your-pre-installed-windows-7-computer-with-xp/

How To Dual Boot Windows Xp And Windows 7 (xp Installed First)

Installing Windows XP after Windows 7 would require you to reinstall the updated version of the Windows Boot Manager to resolve this issue before you can dual boot. The free Windows Easy Transfer lives in the SupportMigwiz on your Windows 7 DVD. If so, skip on to the next section. Click Next when the format has finished and Windows 7 begins installing itself on your old Windows XP drive.

To create this partition from inside Windows XP: Click Start and click Control Panel. A window pops up showing the drive is being queried for available space. Choose Custom (advanced). How To Install Windows Xp Over Windows 7 This older version will not recognize future versions of Windows, such as Windows 7, and boot into XP by default.

All rights reserved. On the primary drive there will be two partitions - one defined as C: and the other without a drive letter. Ecobee3 vs. http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html You may need to replace old software with newer versions or drop by the manufacturer’s Web site to see whether they offer free updates.

This will display a list of the currently-configured bootloader. Dual Boot Windows 7 And Xp Usb Drive Create Boot Loader Once installation of XP is successful you can now go through and install the latest Microsoft Updates and drivers. You'll now have a drive visible within Windows Explorer. HowtoForge's previous guide to modifying partitions with GParted is a great place to start, but it's a fairly basic procedure: Advertisement Advertisement Resize your current OS drive to free up enough

Dual Boot Windows 7 And Xp Separate Hard Drives

Partitioning your hard drive will vary depending on whether you're running XP or Vista—namely because Vista has a partition tool baked in, XP does not.Partition Your Hard Drive in XPTo partition All rights reserved. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) This will disable BitLocker encrpytion until you next reboot, and you'll be able to resize the partition. Windows Xp Dual Boot Windows 10 Click the hard drive you wish to install your OS to.

This is because EasyBCD will automatically search for NTLDR, the Windows XP bootloader, and pick the right drive for you. this contact form Simply click your desired version of Windows and your PC will do the rest. For example, if your password is the name of your elementary school, the password hint could be, “My first elementary school.” Type your product key and click Next. Hive Five Winner for Best CD and DVD Burning Tool: ImgBurn Hive Five Winner for Best CD and DVD Burning Tool: ImgBurn Hive Five Winner for Best CD and DVD Burning… Dual Boot Windows 7 And Xp Easybcd

Press spacebar when prompted to boot from your Windows XP CD. Knowledgebase Guides Our Recovery Disks for Windows NeoSmart Knowledgebase Knowledgebase Guides Our Recovery Disks for Windows Search Installing XP as a second OS /EasyBCD /Dual-Boot Guides /Windows XP /Installing XP as The reason why so many chose to stick with XP and forgo Vista was due to the perception that Vista was less reliable and more troublesome than XP. http://ocvninfo.net/windows-7/device-driver-software-was-not-successfully-installed-windows-7.html Do You Need to Update Your Computer's BIOS?

You can then delete the Windows 7 partition and use GPartEd to re-extend the partition to take up the entire disk or the EXTEND command in Vista DISKPART.

Tagged with: Dual Boot Windows 7 And Xp Same Partition Make Room For the Second Version of Windows: You'll need available hard drive space for the next version of Windows. Now type in LIST VOLUME - this gives you a readout of the volumes available on the system.

You've now got all the tools necessary to dual-boot Windows 7 and XP or Vista—or even to triple-boot Windows 7, Vista, and XP.

Conclusion If you want to set a default OS on your dual boot system, check out The Geek’s tutorial on how to set it up. On some systems depending on the primary storage controller We'll then install Windows 7 and use the EasyBCD utility to modify Windows 7's bootloader to get XP loading properly. Once you’re confident that the Windows 7 install meets all your requirements, you can remove XP and reclaim the space it occupied on your hard drive.Note that to do this, you’ll Dual Boot Windows 7 And Xp Software Clicking Format and clicking OK, completely erases your copy of Windows XP and all of your information on that partition.

Choose Use Recommended Settings. VistaBootPRO is now called DualBootPRO and is no longer free, it’s $9.95 for a single user license. Windows 7 gives you options: Home, Work, or a Public. http://ocvninfo.net/windows-7/windows-boot-manager-boot-failed-windows-10.html Follow the onscreen instructions and accept the Windows XP Licensing Agreement.

Windows 7 keeps your PC more secure by not letting other PCs share any of its files. EasyBCDSystem Requirements Supported Operating Systems EasyBCD and UEFI EasyBCD Basics Viewing Entries Adding Entries Renaming Entries Changing the default boot entry Changing the Menu Options Reordering Menu Entries Deleting Menu Entries Assign a drive letter and click Next. Put your Windows XP CD in the drive and press a key when you see the "Press any key to enter Windows Setup…" message.

Then type in DISKPART and press enter to get into the DISKPART utility. FOLLOW US Twitter Facebook Google+ RSS Feed Disclaimer: Most of the pages on the internet include affiliate links, including some on this site. Judging from our early experiences and the general consensus, if Vista was half-baked, Windows 7 is a veritable golden hunk of angel-food cake. This takes about 10 to 30 minutes on most PCs, and ends with Windows 7 restarting your PC.

There are a few options to get around this. Luckily we've already gone down this road before in step-by-step detail, complete with pictures, so check out our previous guide to creating a new partition in Vista. Restart the machine and that's it – the XP boot loader is the only one left on the system and XP loads. Leave the checkbox for automatic configuration checked, and do not manually change the drive in EasyBCD thereafter.

Download and install the latest version of EasyBCD. In previous dualbooting tutorials we make use of a utility called EasyBCD by NeoSmart Technologies which is a very useful frontend GUI for BCDEDIT - the application which lets you view When prompted, press any key to boot from the DVD. If you've got a method of your own that you prefer, let's hear it in the comments.Reply219 repliesLeave a reply You may also likeThe ConcourseWheel Of Fortune Contestant Completely Blows ItToday